Place Call Using Name, Number Or Video Address - Cisco TelePresence SX10 User Manual

9 Place Call

Place Call Using Name, Number or Video Address

Make sure Call is selected and
press OK or the green Call
button.
As soon as you start typing, the
green Call button will appear to
allow you to place the call any
time.
Possible matches will appear
as you type. If no matches are
found, this will also be indicated.
Context sensitive settings will be
accessible. Just select the More
field ( ... ) as explained on the
previous page.
Use the Cursor keys to select
the Search or Dial field, as
outlined.
Press the red End Call button on
the remote control, or use the
Cursor keys to select End and
press OK to terminate the call.
To enter numbers just press
the corresponding keys on the
remote.
To invoke the virtual keyboard,
use the left arrow Cursor key to
move to the 123 field. You may
now move about the keyboard
and select characters. Press OK
to select a character.
About Placing Calls
You may call someone who is not
listed in your list of contacts by
keying in their name, address or
number using the virtual keyboard.
Anyone you have previously called
will appear in the Recents list and
you may then transfer any of them
to your list of Favorites. This is
described in the section Contacts.
Call Using Video Address
The procedure when using an IP type
video address to call someone is
similar. Just key in the address and
use * as separator. The system will
interpret it correctly and convert it
for you so that the video address
appears as correctly entered.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.