Change Font Size; Change Screen Brightness - Cisco DX600 series User Manual

Change Font Size

Accessibility feature
Audible Message Waiting Indicator
(AMWI)
Standard 12-key layout and
grouping of functions
Change Font Size
Procedure
Step 1 In the Settings application, tap Accessibility.
Step 2 Tap Font size.
Step 3
Select a font size.

Change Screen Brightness

Procedure
Step 1
In the Settings application, tap Display.
Step 2 Tap Brightness.
Step 3 Slide the bar left to lower the brightness or right to increase the brightness.
Step 4 Tap OK.
Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
94
Description
Phones can send a line-specific
stutter dial tone when a voice
message is waiting on the phone.
Users hear it only when using the
line with the waiting messages.
When the user goes off hook (on
the line for which a voice message
has been left), the stutter dial tone
is heard. Users can change the
audible voice-message indicator
setting by logging in to their Cisco
Unified Communications Self Care
Portal and changing the audible
message-indicator setting to On
or Off.
Cisco DX650 keypad provides
standard key layout, which enables
users to use existing or familiar key
positions (including a nib on Key
5).
Accessibility
Setup requirements
Standard on all phones.
Configuration is required.
Standard on all phones; no set up
is required.
OL-28931-01