Table of Contents
Advertisement
9
Place Call
Place Call Using Name, Number or Video Address
Make sure Call is selected and
press OK or the green Call
button.
As soon as you start typing, the
green Call button will appear to
allow you to place the call any
time.
Possible matches will appear
as you type. If no matches are
found, this will also be indicated.
Use the Cursor keys to select
the Search or Dial field, as
outlined.
Press the red End Call button or
use the Cursor keys to select
End and press OK to terminate
the call.
To enter numbers just press
the corresponding keys on the
remote.
To invoke the virtual keyboard,
use the left arrow Cursor key to
move to the 123 field. You may
now move about the keyboard
and select characters. Press OK
to select a character.
About Placing Calls
You may call someone who is not
listed in your list of contacts by
keying in their name, address or
number using the virtual keyboard.
Anyone you have previously called
will appear in the Recents list (until
you clear that list) and you may then
transfer any of them to your list of
Favorites. This is described in the
section Contacts.
Call Using Video Address
The procedure when using a video
address to call someone is similar.
Just key in the address and use
*
as
separator. The system will interpret
it correctly and convert it for you so
that the video address appears as
correctly entered.
D1509704 User Guide
Cisco TelePresence SX10
Produced: December 2014 for TC7.3
All contents © 2014
Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
