Yealink T46G Administrator's Manual page 61

Parameters
(IPv4) or 2 (IPv4 & IPv6). If you change this parameter, the Skype for Business phone will
reboot to make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config
Phone User Interface:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv4
network.pppoe.user
Description:
Configures the user name for PPPoE connection.
Example:
network.pppoe.user = Xmyl0592123
Note: It works only if the value of the parameter "network.ip_address_mode" is set to 0
(IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 1 (PPPoE). If you change
this parameter, the Skype for Business phone will reboot to make the change take effect. It is
not applicable to T42G/T41P/T40P Skype for Business phones.
Web User Interface:
Network->Basic->IPv4 Config->PPPoE->User Name
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN
Port->IPv4->PPPoE->PPPoE User
network.pppoe.password
Description:
Configures the password for PPPoE connection.
Example:
network.pppoe.password = yealink123
Note: It works only if the value of the parameter "network.ip_address_mode" is set to 0
(IPv4) or 2 (IPv4 & IPv6), and "network.internet_port.type" is set to 1 (PPPoE). If you change
this parameter, the Skype for Business phone will reboot to make the change take effect. It is
not applicable to T42G/T41P/T40P Skype for Business phones.
Web User Interface:
Network->Basic->IPv4 Config->PPPoE->Password
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->WAN
Getting Started
Permitted Values Default
String within 32
Blank
characters
String within 99
Blank
characters
47