Cdp - Yealink T46G Administrator's Manual

Yealink Skype for Business HD IP Phones Administrator Guide
To configure LLDP feature via phone user interface:
Press Menu->Advanced (default password: admin) ->Network->LLDP->LLDP Status.
1.
Press
2.
field.
Enter the priority value (1-3600s) in the Packet Interval field.
3.
Press the Save soft key to accept the change.
4.
The Skype for Business phone reboots automatically to make settings effective after a
period of time.

CDP

CDP (Cisco Discovery Protocol) allows Skype for Business phones to receive and/or transmit
device-related information from/to directly connected devices on the network that are also
using the protocol, and store the information about other devices.
When CDP feature is enabled on Skype for Business phones, the Skype for Business phones
periodically advertise their own information to the directly connected CDP-enabled switch. The
Skype for Business phones can also receive CDP packets from the connected switch. When the
VLAN configurations on the Skype for Business phones are different from the ones sent by the
switch, the Skype for Business phones perform an update and reboot. This allows the Skype for
Business phones to be plugged into any switch, obtain their VLAN IDs, and then start
communications with the call control.
Procedure
CDP can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
Parameters
network.cdp.enable
236
or , or the Switch soft key to select the desired value from the LLDP Status
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Configure CDP.
Parameters:
network.cdp.enable
network.cdp.packet_interval
Configure CDP.
Navigate to:
http://<phoneIPAddress>/servlet?
p=network-adv&q=load
Configure CDP feature.
Permitted Values
0 or 1
Default
1