Yealink T46G Administrator's Manual page 227

Parameters
Note: It works only if the value of the parameter "sip.btoe.enable" is set to 1 (Enabled).
Web User Interface:
Settings->BToE->BToE paring Mode
Phone User Interface:
Menu->Features->BToE->BToE Pairing Mode
To configure BToE feature via web user interface:
Click on Settings->BToE.
1.
Select the desired value from the pull-down list of BToE.
2.
Select the desired generation from the pull-down list of BToE Pairing Mode.
3.
Click Confirm to accept the change.
4.
To configure BToE feature via phone user interface:
Press Menu-> Features->BToE.
1.
Press or , or the Switch soft key to select Enabled from the BToE field.
2.
Configuring Basic Features
Permitted Values Default
213