Yealink T46G Administrator's Manual page 42

Yealink Skype for Business HD IP Phones Administrator Guide
Static DNS
Static DNS address(es) can be configured and used even though DHCP is enabled.
Procedure
Static DNS can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
network.static_dns_enable
Description:
Triggers the static DNS feature to on or off.
0-Off
1-On
If it is set to 0 (Off), the Skype for Business phone will use the IPv4 DNS obtained from DHCP.
If it is set to 1 (On), the Skype for Business phone will use manually configured static IPv4
DNS.
Note: It works only if the value of the parameter "network.internet_port.type" is set to 0
(DHCP). If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Network->Basic->IPv4 Config->Static DNS
28
<y0000000000xx>.cfg
<MAC>.cfg
Web User Interface
Phone User Interface
Parameters
Configure the static DNS feature.
Parameters:
network.static_dns_enable
Configure static DNS address.
Parameters:
network.primary_dns
network.secondary_dns
Configure the static DNS feature.
Configure static DNS address.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network&q=load
Configure the static DNS feature.
Configure static DNS address.
Permitted Values
0 or1
Default
0