Yealink T46G Administrator's Manual page 355

Configuring the Severity Level of the Log
Procedure
Severity level can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
Parameters
syslog.log_level
Description:
Configures the detail level of global syslog information to be exported.
0-system is unusable
1-action must be taken immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant condition
6-informational
Note: If you change this parameter, the Skype for Business phone will reboot to make the
change take effect.
Web User Interface:
Settings->Configuration->Global log Level
Phone User Interface:
None
To configure the level of the system log via web user interface:
Click on Settings->Configuration.
1.
Select the desired level from the pull-down list of corresponding log levels.
2.
<y0000000000xx>.cfg
Web User Interface
Permitted Values
Integer from 0 to 6
Configures the detail level of global
syslog information to be exported.
Parameters:
syslog.log_level
Configure the severity level of the logs
to be reported to a log file.
Navigate to:
http://<phoneIPAddress>/servlet?m=m
od_data&p=settings-config&q=load
Default
Troubleshooting
3
341