Yealink T46G Administrator's Manual page 354

Yealink Skype for Business HD IP Phones Administrator Guide
You can also specify the severity level of the log to be reported to a log file. The default log level
is 3.
Log parameters are described below:
Module
Export System Log
Global Log Level
Setting
Module Log Level
Settings
In the configuration files, you can use the following parameters to configure system log settings:
syslog.log_level -- Specify the system log level. The following lists the log level of events

you can log:
0: system is unusable
1: action must be taken immediately
2: critical condition
3: error conditions
4: warning conditions
5: normal but significant condition
6: informational
debug
syslog.mode – Specify the system log to be exported to the syslog server or local system.

syslog.server -- Specify the IP address or domain name of the syslog server to which the

log will be exported.
340
Parameter
Local
Server
Global log Level
Max Log File Size
(1-3072KB)
Register Log Level
Subscribe Log Level
Call Log Level
Ice Log Level
Btoe Log Level
Exchange Log Level
Description
Export the log files to a local system (e.g.,
PC).
Export the log files to a syslog server.
Specify the severity level of the global log.
Specify the maximum size of the global
log.
Specify the severity level of the registration
log.
Specify the severity level of the
subscription log.
Specify the severity level of the call log.
Specify the severity level of the ICE log.
Specify the severity level of the BToE log.
Specify the severity level of the Exchange
log.