Emptying The Master Disposal Box - Riso CZ180 User Manual

Replacing and Disposing Consumables

Emptying the Master Disposal Box

The used master is disposed in the Master Disposal Box.
When the Master Disposal Box is filled with ejected masters, the Empty Disposal Box Indicator lights. Remove the
ejected masters from the Master Disposal Box and discard them.
1
Pull out the Master Disposal Box.
Hold down the Master Disposal Box Release
Lever and pull out the box.
Important!:
• Make sure that the Paper Feed Tray is lowered
to the bottom and pull out the Master Disposal
Box. If not, press the
Panel to lower the Paper Feed Tray to the bot-
tom.
2
Discard the ejected masters.
60
Emptying the Master Disposal Box
key on the Control
3
Place the Master Disposal Box into
position.
Hold down the Master Disposal Box Release
Lever, and insert the Master Disposal Box until it
stops.
Important!:
• Once you pull out the Master Disposal Box,
make sure to empty it before placing it into posi-
tion.
Note:
• Dispose the ejected masters according to the
disposal rule of your local community. p.61