Riso CZ180 User Manual page 23

Important!:
• For thick paper, position the Receiving Tray
Paper Guides a little wider than the actual
paper width.
• If you have moved the Feed Tray Paper
Guides, reposition the Receiving Tray Paper
Guides according to them. If the guides are not
correctly positioned, a problem such as a paper
jam can occur.
3
Adjust the Paper Jump Wing.
Adjust the Paper Jump Wing according to the size
of paper.
Loosen the setscrew of each Paper Jump Wing,
and set to appropriate position. Then, tighten
setscrew to fix each Paper Jump Wing.
Paper Size
B4 and larger*
Legal and larger*
Smaller than B4
Smaller than Legal
*Only the CZ180 can use paper of B4 size or larger.
B4(Legal) and larger paper
Paper Jump Wing
position
B4 A3
B5 A4
Paper smaller than B4 (Legal)
Closing the Paper Receiving Tray
Fold the Receiving Tray Paper Guides inward, and
slightly lift and push back the Paper Receiving Tray to
close it.
Important!:
• If the Receiving Tray Paper Guides are outside of B4/
Legal paper position, slide them to the B4/Legal
paper position and fold them inward.
Basic Operations
23
Preparing to Print