Connection With A Computer (Option) - Riso CZ180 User Manual

Connection with a Computer (Option)

With an optional interface board (Printer Control Board RISORINC3N) installed, you can directly send data from a
connected computer to the machine as an original for printing. Because digital data itself is used for making a master,
the finish of prints becomes outstanding.
Important!:
• Before making the connections, turn off both the machine and computer.
• The maximum allowable voltage for parallel connector input and output is 5 V.
Connection Method
One-to-one connection with a
Windows PC
Network connections
Option Needed
Printer Control Board Parallel printer cable
RISORINC3N
Printer Control Board Ethernet cable (cross)
RISORINC3N
RISORINC-NET
Printer Control Board Ethernet cable (straight)
RISORINC3N
RISORINC-NET
Before Starting to Use
Cable
IEEE 1284 standard
conformed
10BASE-T or 100BASE-
TX based shielded cable
10BASE-T or 100BASE-
TX based shielded cable
Connection with a Computer (Option)
9