Tilling Depth Adjustment - Honda FR750 Owner's Manual

Tilling depth adjustment

To adjust the tilling depth, remove the locking bolt and move the drag
bar up or down.
Carry out the adjustment with the tiller on a level spot and the engine
stopped.
Adjustment method
Use the gage lines and indentations on the drag bar to adjust the
tilling depth. Line up the top of the bar holder and a gage line, and
tighten the locking bolt.
Pulling up the drag bar...
Pushing down the drag bar...
If the soil is soft and the rotary part sinks into the ground, push
down the drag bar.
If the soil is hard, push down the drag bar and set a shallow tilling
depth.
INDENTATION
Deeper tilling depth
More shallow tilling depth
DRAG BAR
GAGE LINE
DRAG BAR HOLDER
LOCKING BOLT
25