Tilling Work - Honda FR750 Owner's Manual

Turning (when moving)
Turning the tiller during high-speed operation causes the tiller to
turn abruptly and become unstable, resulting in injury or accident.
Do not turn the tiller when it is moving uphill or downhill. When the
tiller is turned on a slope, it may abruptly move in an unforeseen
direction, resulting in an accident, injury, or damage to the tiller.
Turn the tiller with the differential lock lever in the UNLOCK position
and the engine speed slow.

Tilling work

Tilling deeply at first may cause the tiller to lurch forward suddenly.
If a stone or hard object hits against the tines while tilling, the
handlebar may lift up and the tiller may lurch forward suddenly;
caution must therefore be exercised.
When operating the tiller, always walk behind and in the center of
the tiller and hold the handlebar with both hands. If the tiller
becomes imbalanced, an unforeseen accident may occur.
When tilling hard ground, do not till deeply at first; instead, till the
field 2 or 3 times. Do not push against the handlebar excessively.
When turning the tiller:
Disengage the main clutch and slower the engine speed. If the
differential lock is used, set it in the UNLOCK position. Set the
gearshift lever in 1st gear, squeeze the main clutch lever, and turn
slowly. When the turn has been completed, set the gearshift lever
in the WORK position and resume tilling.
30