Tiller Operation; Handlebar Height Adjustment; Tilling Depth Adjustment; Main Clutch Operation - Honda FR800 Owner's Manual

5. BILLER OPERATION
BEFORE ADJUSTING THE HANDLEBAR, BE SURE THE ENGINE IS
OFF.
HANDLEBAR HEIGHT ADJUSTMENT
Before adjusting the handlebar, place the tiller on firm level ground to
prevent the handle from collapsing accidentally.
Stop the engine before adjusting handlebar height.
To adjust handlebar height,
loosen the adjuster knob, select
the appropriate holes in the
handle column and handlebar
bracket, and tighten the knob.
TILLING DEPTH ADJUSTMENT
BEFORE ADJUSTING THE
TILLING DEPTH, BE SURE THE
ENGINE IS OFF.
Tilling depth can be adjusted by
removing the retainer and
sliding the drag bar up or down
asnecessary.
If breaking ground for the first
time, lower the drag bar all the
way. As the soil becomes softer,
the drag bar can be raised.
If not sure about soil conditions,
start with the drag bar in the
lowest oosition (see HANDLING RET
HANDLEBAR BRACKET
DRAG BAR
TIPS, oti page 23
j.
MAIN CLUTCH OPERATION
MAIN CLUTCH LEVER
The main clutch disengages and
engages the power from the
engine to the transmission.
Push the clutch lever down
against the handlebar to engage
the main clutch.
Release the lever to disengage
the main clutch.
20