Throttle Cable Adjustment; Main Clutch Cable Adjustment - Honda FR750 Owner's Manual

Throttle cable adjustment

Loosen the lock nut and turn the
adjusting nut until the free play in
the throttle lever at the end of the
lever is between:
5.0 10.0 mm (2.0 3.9 in) −
After adjusting the free play, tighten
the lock nut firmly.
ADJUSTING
NUT
LOCK NUT

Main clutch cable adjustment

The main clutch cable must be ad-
justed properly before adjusting the
drive belt. Improperly adjusted main
clutch cable may cause the drive
belt to slip on its pulleys, resulting
in loss of power or premature wear
or damage to the drive belt.
1. Check that the free play of the
main clutch lever at the tip of the
lever when the lever is released.
Free play should be:
15.0 20.0 mm (0.59 0.79 in) −
2. If adjustment is necessary, loosen
the lock nut and turn the cable ad-
justing nut in or out untill the corr-
ect free play is obtained.
3. After adjusting the cable free play,
tighten the lock nut securely.
38
−
THROTTLE CABLE
−
FREE PLAY
15 20 mm −
(0.59 0.79 in) −
ADJUSTING
NUT
LOCK NUT
MAIN CLUTCH CABLE
THROTTLE
LEVER
FREE PLAY
5 10 mm −
(2.0 3.9 in) −
MAIN CLUTCH
LEVER
STOPPER