Checking and replacing rotary tines
Wear thick gloves to protect your hands.
Carry out the check or replacement work with the tiller on a level
spot and the engine stopped.
Wear thick gloves to prevent injury to hands.
Place a wooden block under the rotary tine shaft to prevent tines
from dropping.
The inside and outside tines rotate in opposite directions. Be careful
of the movement of the tines when checking or replacing the rotary
part. The rotary tines may turn in an unexpected direction, resulting
in injury.
Before starting the check or replacement work, secure the tiller by
tilting it until the front guard touches the ground and placing a block
under the middle of the speed changer case.
40