Make a copy with a stamp
Introduction
A stamp is a mark you can put on every copy.
Before you begin
To enable the stamp functionality, you must first create a stamp in Océ Express WebTools. For
more information on how to do this, see
Procedure
1. Feed the original face up and centered on the original feeding table.
2. Tap the copy tile. A window with a list of presets opens.
3. Tap [Show all settings]. A list with settings opens.
4. Tap [Stamp] under the [Image] preset.
5. Select your stamp and tap [OK].
6. Define the number of copies and tap the green button.
Create a stamp on page
Chapter 4 - Use the Printing System
Make a copy with a stamp
96.
193