Make A Copy And Remove A Specific Area Of An Original - Canon Océ PlotWave 450 Operation Manual

Make a copy and remove a specific area of an original

Make a copy and remove a specific area of an original
Introduction
You can make a copy and delete a specific area of an original. You can use two settings: [Area to
erase: width] and [Area to erase: length] to define the dimensions of the delete area. And you can
use two settings: [Area to erase: X origin] and [Area to erase: Y origin], to define the relative
position of the delete area on the sheet.
Procedure
1. Feed the original face up and centered on the original feeding table.
2. Tap the copy tile. A window with a list of presets opens.
3. Tap [Show all settings]. A list with settings opens.
4. Tap [Area to erase] under the [Image] preset.
[Area to erase: X ori-
gin]
5. Select [Area to erase: X origin], [Area to erase: Y origin], [Area to erase: width], or [Area to erase:
length] and define the values for your specific area.
6. Make your settings and tap [OK].
7. Define the number of copies and tap the green button.
188 Chapter 4 - Use the Printing System
[Area to erase: Y ori-
gin]
[Area to erase: width] [Area to erase: length]