Print Jobs; Do A Default Print Job - Canon Océ PlotWave 450 Operation Manual

Print Jobs

Do a default print job

Introduction
When you want to print a job and you do not make any settings, the default presets are used. You
only use the Smart Access to start your job.
You can see the presets that are used in the job settings section of your job.
Before you begin
Make sure you submit a job via one of the job submitter applications:
Océ Publisher Express
Océ Publisher Select
Océ Wide format Printer
Driver for Microsoft
®
dows
Océ Postscript Driver
Océ Publisher Mobile
Océ Mobile WebTools
Or submit a job via
LPR
FTP
The cloud (WebDAV)
The home folder
PlanWell Collaborate
USB
NOTE
This following procedure applies when you have not made settings to enable direct print. With
direct print, the job will be printed immediately. For more information, see
page 165.
Procedure
1. After you have submitted a job to the printer, tap the print tile on the user panel to open the list of
locations.
Use Océ Publisher Express to send a print job on page 147
Use Océ Publisher Select 2 to send a print job on page 150
Use Océ Wide format Printer Driver 2 for Microsoft® Windows® to
send a print job on page 152
®
Win-
Use the Océ PostScript® 3 Driver to send a print job on page 154
Use Océ Publisher Mobile to send a print job on page 155
Print from your mobile device on page 157
Use LPR to send a print job on page 159
Use FTP to send a print job on page 158
Use the cloud to send a print job on page 160
Use the home folder to send a print job on page 161
Use the cloud to send a print job on page 160
Print from a USB key on page 166
Direct print on
Chapter 4 - Use the Printing System
Print Jobs
163