Configure The Templates; Fold And Scan Templates - Canon Océ PlotWave 450 Operation Manual

Configure the Templates

Fold and Scan templates

Introduction
A template is a group of predefined settings you can configure yourself. Select the template on
the user panel to easily submit a job with optimized settings.
You can create templates for folding and scanning in Océ Express WebTools under the
[Preferences] tab. You can create various templates and select one of the templates as default.
For scan templates you can also enable one of the factory installed templates.
General template actions
There are several general actions you can perform for templates. You can:
Create a new template on page 98
•
Delete all templates on page 99
•
Export templates on page 101
•
• Import templates on page 100
Restore the factory defaults of the templates on page 102
•
Enable or disable scan templates on page 103
•
Actions per template
Next to this, you can perform actions per template. When you move the mouse pointer over the
template in the list you can see the available actions:
Icon Description
[Edit a template], to change the settings or the destination. You can also
modify factory installed scan templates.
[Copy a template], to create a new template.
[Delete a template], to remove one specific template.
NOTE
• When you have deleted a factory installed scan template, you
can retrieve it by restoring the factory defaults. For more infor-
mation, see
• Some destinations (external locations and Smart Inboxes) can-
not be deleted when they are set as a scan destination in the
scan template.
[Set this template as the default template], to set one default selected tem-
plate.
Chapter 3 - Define your Workflow with Océ Express WebTools
Restore the factory defaults on page
Configure the Templates
58.
97