Table of Contents
Advertisement
Select the e-shredding algorithm
Introduction
The e-shredding function allows you to securely erase jobs from the system. This prevents
unauthorized people from accessing deleted jobs.
You can select one of the following algorithms:
• [Gutmann].
All jobs on the system are erased in 35 overwrite passes.
• [DoD 5220.22-M].
All jobs on the system are erased in three overwrite passes.
• [Custom] allows you to define the number of passes manually.
The factory default is [DoD 5220.22-M].
NOTE
Only set the number of overwrite passes to a number higher than 1 if your security policy
requires it. An increase of passes can affect the performance.
Procedure
1. Open the [Security] - [Configuration] tab.
2. Click on [Edit] in the upper right hand corner of the [E-shredding] section.
3. Select the preferred method for the [E-shredding algorithm].
4. Click OK to confirm.
Chapter 3 - Define your Workflow with Océ Express WebTools
Select the e-shredding algorithm
81
Advertisement
Table of Contents
