Table of Contents
Advertisement
Set the print job default settings
Setting
[Media source]
[Media selection policy]
[Cut method]
[Custom print length]
[Add leading strip]
[Add trailing strip]
Overview of the [Print job defaults] - [Layout] settings
Open the [Preferences] - [Print job defaults] tab. Go to [Layout] and click Edit in the upper right-
hand corner.
Setting
[Scale]
[Mirror]
60
Chapter 3 - Define your Workflow with Océ Express WebTools
Description
Select the default output material and format for the media used
on the printer.
• Select [Automatic] to automatically select the media.
• Select [Manual feed] to insert a cut sheet.
• Select the specific roll number of the media you want to use by
default.
The system screen on the printer user panel displays the loaded
rolls.
NOTE
You can only configure the Media selection policy set-
ting, when Media source is set to [Automatic].
• Select [Automatic next larger] to allow the printer to use a me-
dia roll larger than the size of the print, when the exact size is
not available.
• Select [Automatic exact fit] to only allow the printer to use a
media roll that has the exact media size of the print. When the
media roll with the exact media size is not available a media re-
quest appears.
• Select [Standard] to cut the print at a standard media size (DIN,
ANSI etc.).
• Select [Synchro] to cut the print at the end of the image.
• Select [Custom] (numeric) to cut the print at a specific length.
Enter the cut length of your print job.
When you enter a value, the printer adds a blank strip of the speci-
fied length at the top of the output.
When you enter a value, the printer adds a blank strip of the speci-
fied length at the bottom of the output.
Description
• Select [Automatic scale to the media size] to scale the image to
the media.
• Select [Automatic scale down when image is larger than media]
to scale down the image one format smaller than the original.
• Select [Custom scale factor] to enter your own scale percent-
age, with 100 percent as no scaling.
Select [On] to mirror the image along the vertical axis - the media
transport direction.
4
Advertisement
Table of Contents
