Fold delivery destination
Introduction
The actual fold delivery destination can vary depending on the media weight, the selected folding
package and fold delivery, and the printer output length.
NOTE
• It is not possible to fold when the printer output length is smaller than 0,276m.
• The output length sizes that result in the delivery destination listed below, are based on the
default values for the maximum folding length settings ([Maximum sheet length for first fold]
is 2m; [Maximum sheet length for second fold] is 6m).
For more information on the maximum folding length settings, see
length on page
Media 60 grams
[Folding pack‐
age]
[Full fold]
[First fold only]
Media 75 grams
[Folding pack‐
age]
[Full fold]
221.
[Fold delivery]
[Stacker] or
[Belts].
[First fold output] < 1.22 m
[Fold delivery]
[Stacker] or
[Belts].
Output
Actual delivery destination
length
< 1.22 m
Delivered on stacker or belt.
1.22 m - 2 m
Delivered on stacker or belt.
Possible paper jam.
2 m - 6 m
Delivered in first fold delivery
> 6 m
Length known at start.
Unfolded, delivered in top delivery tray.
> 6 m
Length not known at start.
Possible paper jam.
Delivered in first fold delivery.
1.22 m - 6 m
Delivered in first fold delivery.
Possible paper jam.
> 6 m
Length known at start.
Unfolded, delivered in top delivery tray.
> 6 m
Length not known at start.
Possible paper jam.
Output
Actual delivery destination
length
< 2 m
Delivered on stacker or belt.
2 m - 6 m
Delivered in first fold delivery
> 6 m
Length known at start.
Unfolded, delivered in top delivery tray.
> 6 m
Length not known at start.
Possible paper jam.
Fold delivery destination
Set the maximum folding
Chapter 5 - Use the Folder
4
219