1-Port Oc-48C/Stm-16 Atm Spa Overview; 1-Port Oc-48C/Stm-16 Atm Spa Leds - Cisco Catalyst 6500 Series Hardware Installation Manual

1-Port OC-48c/STM-16 ATM SPA Overview

1-Port OC-48c/STM-16 ATM SPA Overview

The following sections describe the 1-Port OC-48c/STM-16 ATM SPA:
•
•
•

1-Port OC-48c/STM-16 ATM SPA LEDs

The 1-Port OC-48c/STM-16 ATM SPA has three LEDs, as shown in
Figure 3-18
1
2
Table 3-14
Table 3-14
LED Label
A/L
C/A
STATUS
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
3-24
1-Port OC-48c/STM-16 ATM SPA LEDs, page 3-24
1-Port OC-48c/STM-16 ATM SPA Interface Specifications, page 3-25
1-Port OC-48c/STM-16 ATM SPA Cables and Connectors, page 3-25
1-Port OC-48c/STM-16 ATM SPA Faceplate
1 2
C/A (Carrier Alarm) LED
A/L (Active Loopback) LED
describes the 1-Port OC-48c/STM-16 ATM SPA LEDs.
1-Port OC-48c/STM-16 ATM SPA LEDs
Color
Off
Green
Amber
Off
Green
Amber
Off
Amber
Green
Chapter 3
3 STATUS LED
State Meaning
Off Port is not enabled by software.
Port is enabled by software, loopback is off.
On
Port is enabled by software, loopback is on.
On
Off Port is not enabled by software.
Port is enabled by software, and there is a valid
On
ATM signal without any alarms.
Port is enabled by software, and there is at least
On
one alarm.
Off SPA power is off.
On SPA power is on and good, and SPA is being
configured.
On SPA is ready and operational.
Catalyst 6500 Series Switch SPA Overview
Figure 3-18.
3
SPA-1XOC48-ATM
OL-9041-04