Cisco Catalyst 6500 Series Hardware Installation Manual page 23

Chapter 1 SIP, SSC, and SPA Product Overview
Table 1-5 SIP, SSC, and SPA Compatibility Table for Serial SPAs (continued)
SPA
2-Port and 4-Port Channelized T3 SPA SPA-2XCT3/DS0
2-Port and 4-Port Clear Channel T3/E3
SPA
8-Port Channelized T1/E1 SPA
Table 1-6 SIP , SSC, and SPA Compatibility Table for CEoP SPAs
SPA
24-Port Channelized T1/E1 ATM CEoP
SPA
Modular Optics Compatibility
Some SPAs implement small form-factor pluggable (SFP) optical transceivers to provide network
connectivity. An SFP module is a transceiver device that mounts into the front panel to provide network
connectivity.
Cisco Systems qualifies the SFP modules that can be used with SPAs.
The SPAs will only accept the SFP modules listed as supported in this document. An SFP check is run
Note
every time an SFP module is inserted into a SPA, and only SFP modules that pass this check will be usable.
Table 1-7
Table 1-7
SPA
2-Port and 4-Port OC-3c/STM-1 ATM SPA
1-Port OC-12c/STM-4 ATM SPA
OL-9041-04
Product ID
SPA-4XCT3/DS0
SPA-2XT3/E3
SPA-4XT3/E3
SPA-8XCHT1/E1
Product ID
SPA-24CHT1-CE-ATM
shows the types of optics modules that have been qualified for use with a SPA.
SPA Optics Compatibility
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
SIP Type
Yes No
Yes No
Yes No
SIP Type
Cisco 7600 Cisco 7600
SIP-200 SIP-400
No Yes
Qualified Optics Modules (Cisco Part Numbers)
SFP-OC3-MM
•
SFP-OC3-SR
•
SFP-OC3-IR1
•
SFP-OC3-LR1
•
SFP-OC3-LR2
•
SFP-OC12-MM
•
SFP-OC12-SR
•
• SFP-OC12-IR1
• SFP-OC12-LR1
• SFP-OC12-LR2
Modular Optics Compatibility
No No
No No
No No
Cisco 7600 Cisco 7600
SIP-600 SSC-400
No No
1-5