7600-Sip-400; Cisco 7600 Sip-600; Cisco 7600 Sip-400 Leds - Cisco Catalyst 6500 Series Hardware Installation Manual

Chapter 2 Catalyst 6500 Series Switch SIPs and SSCs Overview

Cisco 7600 SIP-400 LEDs

The 7600-SIP-400 has one LED as shown in
Figure 2-6

7600-SIP-400

SPA INTERFACE
PROCESSOR
Table 2-8
Table 2-8
LED Label
STATUS
Cisco 7600 SIP-400 Physical Specifications
Table 2-9
Table 2-9
Description
Physical dimensions
Shipping weight
Operating temperature
Relative humidity
Storage temperature
Cisco 7600-SIP-600 Overview
Support for the Cisco 7600 SIP-600 was removed in Cisco IOS Release 12.2(33)SXH and restored in
Note
Cisco IOS Release 12.2(33)SXI and later releases.
The following sections describe the 7600-SIP-600:
•
•
OL-9041-04
7600-SIP-400 Faceplate
describes the 7600-SIP-400 LED.
7600-SIP-400 LED
Color
Red
Green
Yellow
Off
describes the 7600-SIP-400 physical specifications.
7600-SIP-400 Physical Specifications
7600-SIP-600 Processor, page 2-10
7600-SIP-600 LEDs, page 2-10
Figure 2-6.
State Meaning
On The 7600-SIP-400 has encountered an error.
On The 7600-SIP-400 is online.
On The 7600-SIP-400 is loading.
Off The 7600-SIP-400 is powered off.
Specifications
The SIP occupies one module slot and can be operated in Cisco 7600
series routers.
8 lb (3.64 kg)
32 to 104°F (0 to 40°C)
10 to 90 percent, noncondensing
–4 to 149°F (–20 to 65°C)
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
Cisco 7600-SIP-600 Overview
2-9