Document Revision History - Cisco Catalyst 6500 Series Hardware Installation Manual

Document Revision History

Table 1
number and document revision number for the change, the date of the change, and a brief summary of
the change.
Table 1
Release No.
12.2(33)SXI
12.2(33)SXH
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
x
records technical changes to this document. The table shows the Cisco IOS software release
Document Revision History
Revision Date
OL-9041-04 October 31, 2008
OL-9041-03 August 20, 2007
Change Summary
The following modifications were made:
Support was restored for the Cisco 7600
•
SIP-600.
Support was restored for the ATM SPAs.
•
Support was added for the following SPAs
•
on the Cisco 7600 SIP-200:
2-Port and 4-Port OC-3c/STM-1 ATM
–
SPA
Support was added for the following SPAs
•
on the Cisco 7600 SIP-400:
2-Port and 4-Port Clear Channel T3/E3
–
SPA
2-Port and 4-Port Channelized T3 SPA
–
8-Port Channelized T1/E1 SPA
–
2-Port and 4-Port OC-3c/STM-1 ATM
–
SPA
1-Port OC-12c/STM-4 ATM SPA
–
5-Port Gigabit Ethernet SPA (V2)
–
Support was added for the following SPAs
•
on the Cisco 7600 SIP-600:
2-Port OC-48 POS/RPR SPA
–
The following modifications were made:
Support was removed for the Cisco 7600
•
SIP-600.
Support was removed for the ATM SPAs.
•
Support was added for the following SPAs
•
on the Cisco 7600 SIP-200:
1-Port Channelized OC-3/STM-1 SPA
–
4-Port and 8-Port Fast Ethernet SPA
–
• Support was added for the following SPA
on the Cisco 7600 SIP-400:
2-Port Channelized T3 SPA
–
Preface
OL-9041-04