Spa Cable-Management Brackets - Cisco Catalyst 6500 Series Hardware Installation Manual

Chapter 6 Installing and Removing a Shared Port Adapter

SPA Cable-Management Brackets

SPAs are shipped with an accessory kit that includes cable-management brackets.
cable-management brackets installed in a SPA, as well as cable routing.
Figure 6-3
To install cable-management brackets on a SPA, perform the following steps:
Screw the two pull assemblies into both sides of the SPA.
Step 1
Insert the cable-management clip into the slot.
Step 2
To remove the cable-management clip, depress the button on the clip and pull it out.
Step 3
Blank filler plugs are provided if no cable-management clips are installed.
Note
OL-9041-04

SPA Cable-Management Brackets

WS-X6 K-SUP 2-2GE
CONSO LE
PORT
MODE
CONSO LE
SUPER VISOR 2
PCMCIA
OSM-4O C12 POS-SI
4 PORT OC-12 POS SM
IR
7600-MS C-600
MODULAR
SERVICES CARD
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
Switch
Load
100%
PORT 1
EJECT
1%
SPA-4XO C3-ATM
SPA Cable-Management Brackets
Figure 6-3 shows
PORT 2
6-7