Cisco Catalyst 6500 Series Hardware Installation Manual page 95

Chapter 3 Catalyst 6500 Series Switch SPA Overview
The 10-Port Gigabit Ethernet SPA accepts only the SFP modules listed as supported in this document.
Note
An SFP module check is run every time an SFP is inserted into the 10-Port Gigabit Ethernet SPA, and
only SFP modules that pass this check can be used by the 10-Port Gigabit Ethernet SPA.
SFP modules exist for technologies other than Gigabit Ethernet and for products other than the 10-Port
Gigabit Ethernet SPA. However, the information in this document pertains only to SFP modules that plug
into the 10-Port Gigabit Ethernet SPA ports.
The SFP module has a receiver port (RX) and a transmitter port (TX) that compose one optical interface.
Table 3-35
Table 3-35
SFP Module
Product Number
SFP-GE-S
SFP-GE-L
SFP-GE-Z
Table 3-36
Specification
Wavelength
Cabling distance (maximum)
Operating case temperature
range
Storage temperature range
Supply voltage range
SFP-GE-S Modules
The 1000BASE-SX (short-wavelength) module operates on standard multimode fiber-optic link spans
of up to 500 m on 50/125 um multimode fiber (MMF) and 300 m on 62.5/125 um MMF.
OL-9041-04
and Table 3-36 provide SFP information and specifications.
10-Port Gigabit Ethernet SFP Module Options
SFP Module
Short wavelength
(1000BASE-SX)
Long wavelength/long haul
(1000BASE-LX/LH)
Extended wavelength
(1000BASE-ZX)
10-Port Gigabit Ethernet SFP Module Specifications
Description
SFP-GE-S: 770 to 860 nm
SFP-GE-L: 1270 to 1355 nm
SFP-GE-Z: 1500 to 1580 nm
SFP-GE-S: 500 m on 50/125um MMF; 300 m on 62.5/125um MMF
SFP-GE-L: 6.2 miles (10 km)
SFP-GE-Z: 49.7 miles (80 km)
SFP-GE-S: 23 to 185 degrees F (–5 to 85 degrees C)
SFP-GE-L: 23 to 185 degrees F (–5 to 85 degrees C)
SFP-GE-Z: 23 to 185 degrees F (–5 to 85 degrees C)
SFP-GE-S: –40 to 185 degrees F (–40 to 85 degrees C)
SFP-GE-L: –40 to 185 degrees F (–40 to 85 degrees C)
SFP-GE-Z: –40 to 185 degrees F (–40 to 85 degrees C)
SFP-GE-S: 3.1 to 3.5 V
SFP-GE-L: 3.1 to 3.5 V
SFP-GE-Z: 3.1 to 3.5 V
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
10-Port Gigabit Ethernet SPA Overview
Description
Contains a Class 1 laser of 850 nm for
1000BASE-SX (short-wavelength) applications.
Contains a Class 1 laser of 1310 nm for
1000BASE-LX/LH (long-wavelength)
applications.
Contains a Class 1 laser of 1550 nm for
1000BASE-ZX (extended-wavelength)
applications.
3-55