2-Port Gigabit Ethernet Spa Leds - Cisco Catalyst 6500 Series Hardware Installation Manual

2-Port Gigabit Ethernet SPA Overview

2-Port Gigabit Ethernet SPA LEDs

The 2-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port and a STATUS LED,
as shown in
Figure 3-37
1
Table 3-24
Table 3-24
LED Label
A/L
STATUS
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
3-44
Figure 3-37.
2-Port Gigabit Ethernet SPA Faceplate
1
A/L (Active/Link) LED
describes the 2-Port Gigabit Ethernet SPA LEDs.
2-Port Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Green
Amber
Chapter 3
2 STATUS LED
State Meaning
Off Port is not enabled.
Port is enabled and the link is up.
On
Port is enabled and the link is down.
On
Off SPA power is off.
On SPA is ready and operational.
On SPA power is on and good, and SPA is being configured.
Catalyst 6500 Series Switch SPA Overview
3
SPA-2X1GE
2
OL-9041-04