Names Of Parts And Functions (Rear) - JVC VF-HP790G Instruction

Introduction
Names of Parts and
Functions (Rear)
DC INPUT SDI INPUT
O
N
I
TALLY Lamp
Displays the monitor status of the input screen in red.
The lamp lights up in red only when Tally PGM (Program)
signals are input.
Memo ：
● Use [TALLY] switch K to turn ON/OFF the display function
of this lamp.
J
VF CABLE HOLDER
For clamping the provided VF cable when connecting it to the
input terminal.
Memo ：
● When connecting the VF cable, secure the cable with the
holder to prevent it from disconnecting. (A Page 5)
K
[TALLY] Switch
For turning ON/OFF the TALLY lamp I.
ON : TALLY is enabled.
OFF : TALLY is disabled.
Memo ：
● This switch does not affect the operation of the TALLY
lamps H on the screen.
L
DIP Switch
Do not touch as the switch function is currently not available.
M
[VF CABLE] Input Terminal
For connecting to the VF output terminal (20-pin) of the
GY-HM790 series using the provided VF cable.
4
I
J
VF CABLE TALLY
K
ON
OFF
L
M
N
[SDI INPUT] Terminal
The input terminal for SDI video signals.
To display the image from this terminal, set [INPUT SOURCE]
in the [VIDEO FORMAT] menu to ASDIB. (A Page 11)
To use the image from this terminal as return signals, set
[SDI RETURN] to AONB while [INPUT SOURCE] is being set
to AVFB.
Memo ：
● You can select the desired video format using
[FRAME RATE] and [FORMAT] in the [VIDEO FORMAT]
menu. (A Page 11)
O
[DC INPUT] Terminal (XLR type, 4-pin)
This viewfinder can be operated by connecting to an external
power supply of DC 12 V. (When this viewfinder is connected
to the GY-HM790 series, it is not necessary to connect an
external power supply to this terminal.)