Names Of Parts And Functions (Front) - JVC VF-HP790G Instruction

Names of Parts and
Functions (Front)
A
[MENU] Dial (Button)
● When the normal screen is displayed, press this dial for
more than 1 second to display the menu of the camera.
The menu of the camera is displayed when the
[INPUT SOURCE] setting of this viewfinder is set to [VF]
and the GY-HM790 series is in the camera mode.
● When the menu of this viewfinder is displayed, scroll this
dial up and down to move the cursor ( ) up and down to
select an item.
● When the menu of the camera is displayed, use this dial to
select the menu item and setting value. Press the dial to
confirm the selected item.
B
[STATUS/MENU] Button
● When the normal screen is displayed, press this button to
display the additional information. The additional
information that is displayed varies according to the input
image.
● Image from the camera's viewfinder:
Displays of [CAMERA NAME] or [SAFETY ZONE],
[CENTER MARK], [ASPECT MARKER], [ZEBRA],
[SPOT METER], [STATUS] set in the GY-HM790 series.
● Image from this viewfinder's [SDI INPUT] terminal:
Displays of [SAFETY ZONE], [CENTER MARK],
[ASPECT MARKER], [ZEBRA], [CAMERA NAME] set in the
menu of this viewfinder.
● When the normal screen is displayed, press this button for
more than 1 second to display the menu of this viewfinder.
● When the menu of the camera is displayed, the menu
display switches every time this button is pressed for more
than 1 second.
(Camera's menu 1 [Favorites Menu])
● When the menu of this viewfinder or the camera is
displayed, press this button to return to the normal screen.
Memo ：
● Additional information does not appear in [1 : 1] display.
● The status of displaying or hiding the additional information
is not saved. And the additional information is always
displayed upon startup.
C
For adjusting the brightness of the screen. Turn to the right to
brighten and to the left to darken.
Memo ：
● When the camera's viewfinder image is input, the [VF
D
A For adjusting the contrast of the screen. Turn to the right to
increase the contrast and to the left to decrease the contrast.
MENU
B
E
STATUS
C
BRIGHT
For adjusting the peaking of the screen. Turn to the right to
sharpen the contour and to the left to soften.
D
Memo ：
CONTRAST
● This adjustment control is disabled when the Focus Assist
E
PEAKING
● When the camera's viewfinder image is input, the [VF
F
1:1
G
FOCUS
ASSIST
F
H
Makes focusing easier when displaying HD videos.
Press this button to display the input video signals in 1: 1 ratio
without resizing. The [ASPECT MARKER], [SAFETY ZONE],
[CENTER MARK], [ZEBRA], [SPOT METER],
[CAMERA NAME], [CAMERA STATUS] display will be
temporarily AOFFB during this display.
Memo ：
● Control status of the [1 : 1] button is not saved.
● This button is disabled when [INPUT SOURCE] is set to
● [1 : 1] display is AOFFB in the following cases.
G
Press this button to display the focus section in color.
Accurate focusing can be done. (PEAKING cannot be
adjusted.)
Memo ：
● The color and level of the focus section can be changed at
● When connected to the GY-HM790 series, the
● When the return video is displayed, the setting of the
● When connected to the GY-HM790 series, the viewfinder
H
Displays the monitor status of the input screen, either in red or
green.
When Tally PGM (Program) signals are input, the lamp lights
up in red.
When Tally PVM (Preview) signals are input, the lamp lights
up in green.
When CALL signals are input, the lamp blinks in red.
[BRIGHT] Adjustment Control
BRIGHT] adjustment knob on the camera is disabled.
[CONTRAST] Adjustment Control
[PEAKING] Adjustment Control
is activated.
PEAKING] adjustment knob on the camera is disabled.
[1 : 1] Button
ASDIB and SD-SDI signals are input from the
[SDI INPUT] terminal.
● When the power is turned on
● When the menu of this viewfinder or the camera is
displayed
● When the video format of the display image is changed
● When changed to the return video
[FOCUS ASSIST] Button
the Menu screen. (A Page 10)
[FOCUS ASSIST] button on the camera is disabled.
[FOCUS ASSIST] button on this viewfinder is disabled.
will not operate under the following conditions.
During BARS ON, SKIN COLOR ADJUST or SKIN AREA
SW ON
TALLY Lamp
3