Video Format Menu Screen - JVC VF-HP790G Instruction

Item
PEAKING FREQ. LOW
MIDDLE
HIGH
^
PAGE BACK

VIDEO FORMAT Menu Screen

Settings in bold are factory default settings.
Item Setting Value
INPUT SOURCE VF
SDI
SDI RETURN
OFF
ON
INPUT SIGNAL AUTO
MANUAL
FRAME RATE 60
50
FORMAT
When FRAME 1080I
720P
RATE is set to
480I
60
When FRAME 1080I
720P
RATE is set to
576I
50
ASPECT[SD] 4:3
16:9
PAGE BACK ^
Setting Value
This item sets the frequency band where the contour is emphasized with the
[PEAKING] control.
LOW
MIDDLE : Emphasizes the intermediate frequency band.
HIGH
Memo ：
● This item is disabled when the Focus Assist is activated.
This returns to the [MAIN MENU] screen.
Select the input image to display on the LCD screen.
VF
SDI
This item sets whether to use the signals input to this viewfinder's [SDI INPUT]
terminal as return signals.
OFF : Return signals are supplied by the camera. Does not use the signals input to the
ON : Uses the signals input to the [SDI INPUT] terminal as the return signals.
Memo ：
● When [INPUT SOURCE] is set to ASDIB, this item appears as A----B and cannot
be selected.
Select whether to automatically detect the video format of the input signals.
AUTO
MANUAL : The video format is not automatically detected; select the video format
Memo ：
● When the return video is input, set this item to AAUTOB.
This item sets the frame rate of the input signals.
60 : Select this when the frame rate of the input signals is 60 Hz.
50 : Select this when the frame rate of the input signals is 50 Hz.
Memo ：
● When [INPUT SIGNAL] is set to AAUTOB, this item appears as A----B and cannot
be selected.
Select the format of the input signals.
1080I : Select this when the input signal is HD1080i.
720P : Select this when the input signal is HD720p.
480I : Select this when the input signal is SD480i.
576I : Select this when the input signal is SD576i.
Memo ：
● When [INPUT SIGNAL] is set to AAUTOB, this item appears as A----B and cannot
be selected.
● If [System Definition] of the GY-HM790 series is set to ASD (DV)B when
[INPUT SOURCE] is set to AVFB, select A1080IB.
● When this item is set to A720PB while the [INPUT SOURCE] is set to AVFB, the
return video supplied by the camera is not displayed.
● A480IB or A576IB can only be selected when [INPUT SOURCE] is set to ASDIB.
This item sets the aspect of the screen display when SD signals are input.
This item is enabled only when SDI signals are input to the [SDI INPUT] terminal
while [INPUT SOURCE] in the [VIDEO FORMAT] menu is set to ASDIB.
4:3 : Displays 4:3 input signals as-is.
16:9 : Displays 4:3 images in 16:9. This is valid when the input signals are at
This returns to the [MAIN MENU] screen.
: Emphasizes the low frequency band.
: Emphasizes the high frequency band.
: Inputs the image from the camera's viewfinder.
: Inputs the image from this viewfinder's [SDI INPUT] terminal.
[SDI INPUT] terminal.
: Automatically detects the video format.
using [FRAME RATE] or [FORMAT].
SQUEEZE.
Description
Description
11