Precautions During Use - JVC VF-HP790G Instruction

Studio viewfinder
Hide thumbs Also See for VF-HP790G:
Table of Contents

Advertisement

Introduction

Precautions During Use

Location of Storage and Use
Do not place this product at the following locations.
Doing so may cause the product to malfunction or break
down.
● Hot or cold places beyond the allowable operating
temperature range of 0 °C to +40 °C.
● Humid places beyond the allowable humidity range of
30 % RH to 80 % RH (non-condensing).
● Places in the vicinity of a strong magnetic field, such as
near transformers or motors.
● Near equipment that emit radio waves, such as
transceivers or mobile phones.
● Places that are subject to dust or sand.
● Places that are subject to strong vibrations.
● Places that are susceptible to condensation, such as
near windows.
● Places that are subject to vapor or oil, such as kitchens.
● Places that emit radioactive rays or X-rays, and
corrosive gases.
Noise may occur in the images or the colors may change
when this product and its connecting wire are used in
places subjected to strong radio or magnetic waves (e.g.,
near radios, TVs, transformers, or monitors).
Handling the Product
Insufficient ventilation may result in malfunction of this
product. Make sure that objects placed around this product
do not obstruct its ventilation.
Do not place containers filled with water (vases, plants,
cups, cosmetics, drugs and so on) on top of this product.
Water getting into the interior of the equipment may result
in fire and electric shock.
Moving the Product
Remove connecting cables before moving this product.
When moving this product, do so after turning off the power of
the connecting camera, and make sure to unplug the cable
from this product. Failure to do so may damage the cable,
causing fire or electric shock.
Maintenance
Turn off the power of the connecting camera before
performing maintenance of this product.
Use a soft cloth to wipe the product. Do not wipe using
thinner or benzene, as doing so may cause the surface to
melt or turn cloudy. When there is significant soiling, wipe
using a cloth by dipping it in a neutral detergent that is
diluted with water, followed by cleaning using a dry cloth.
The exterior of this product may change or the paint may
fall off when come into contact with rubber or vinyl products
for a prolonged period of time.
2
Energy Conservation
When this product is not used for a prolonged period of time,
turn off the power of the system for safety and energy
conservation purposes.
LCD Screen
Leaving the LCD screen exposed to the sun will damage the
LCD screen. Do not place the product outdoors or near a
window.
Do not scratch or press hard on the LCD screen, or place
objects on top of the screen. Blotches may appear on the
screen and lead to malfunction of the LCD panel.
When using the product in cold places, horizontal stripes and
trailing images may appear or the screen may appear dark.
These are not malfunctions. The screen will appear normal
again when the temperature rises.
Continuous display of still images may cause residual images.
The screen will return to normal after some time.
When the product is in use, the screen or cabinet may
become warm. This is not a malfunction.
Bright/Dark Spots
Bright spots (red, blue or green) and dark spots that are
continuously lit up may appear on the screen.
An LCD panel is manufactured with extremely precise
technology. Although it consists of more than 99.99 %
effective pixels, it may exhibit a very small number of
continuous bright or dark spots on the screen.
Maintaining the LCD Screen
The surface of an LCD screen is specially treated to control
reflections off the surface. Improper maintenance may affect
the performance of the screen. As such, please adhere to the
following points.
● Use a soft cloth such as a cleaning cloth or spectacles
cleaning cloth to lightly wipe off any dirt on the surface of
the screen.
● When there is significant soiling, wipe using a soft cloth
such as a cleaning cloth or spectacles cleaning cloth
soaked with a bit of water.
● Do not use alcohol, benzene, thinner, acidic, alkaline or
abrasive cleaning fluid, or chemical wiping cloth to clean
the screen as they will scratch the surface.
Disposal
● Do not dispose this product with other normal waste
products.
Do not throw the monitor into the rubbish that will be sent to
the dumping-ground.
● The fluorescent tube of this product contains mercury.
Follow the rules and regulations of the local authorities for
disposal.

Advertisement

Table of Contents
loading

Table of Contents