Electrolux W365H Service Manual page 95

Service
Manual
19
131
141
Fig.
Service codes 131-137 and 141-147 shall be used for the different wash
19
programs. Starting from left to right.
Codes 131-137 changes the value for time and can be changed ±20 min.
Codes 141-147 changes the value for temperature and can be changes
±20°C.
Code 138 changes the value for water level and can be changed ±20 scale
units. The display does not show present level, but 0.
Note: When using code 138 the level will change in all main washes in all
wash programs without option button pressed. Re. scale units, se "Pre-
wash"
Rinses
Service code 86
Second last rinse can be deleted by changing from 0:86 to 1:86. Valid for
all wash programs without option button pressed.
Service code 87
A limit giving a maximun allowable extraction speed can be activated by
changing from 0:87 to 1:87.
Service code 88
Start possibility by pressing the START-button can be blocked by changing
from 0:88 to 1:88.
Service code 151
It is possible to add up to five rinses. The extra rinses will be added to all
programs without option button pressed.
Service code 152
Change the value for washer level in all rinses and programs without option
button pressed. Level can be changed ±20 scale units.
not show present level, but 0.
438 9149-81/06
04.03
23. Programme unit
132 133 134 135 136
142 143 144 145 146
30 40 60 60 95
137
147
80 60
The display does
5114 B, 5112, 5357, 5355, 5354, 5115, 5353, 5114
23
21