Electrolux W365H Service Manual page 43

Service
Manual
07E
The water level is too high during programme
operation (above the measurable level).
If the power is on, be very careful when
working on the machine.
Try to restart the machine (i.e. reset the error
code) by pressing the Start button quickly. If the
error returns, first make sure that:
• the level hose and air box are not blocked
(blow into the level hose)
• that none of the water valves has locked
(i.e. water pours in continuously).
1. Visually inspect. Is there too much water in the
machine?
No
Exit the programme and drain the
machine.
2. Exit the programme. Enter the service programme
Fig.
and activate code 24. Read the display. Undo the level
22
hose from the programme unit and verify whether the
level falls.
No
3. Inspect whether the level input on the programme
unit is blocked. If this is not the case, then the
programme unit is probably defective.
438 9152-31/06
05.03
12. Troubleshooting
Yes
Yes
Inspect the level system (hoses,
nipples and air box).
22
3350
Alt.
Level hose
connection
12
Level hose
connection
5566 C
17