11E - Electrolux W365H Service Manual

Service
Manual
10E
The drain cycle is too long.
Try to restart the machine (i.e. reset the error code) by pressing the Start
button quickly.
If the error returns, first verify these items:
• Is the drain blocked by fluff or foam?
• Are the the level hose and air box blocked (blow into the level hose)?
• For machines with a drain pump, verify correct operation.
• Does water run out when the power switch on the machine is switched
off?
• Verify the operation of the drain using the service programme.
• Is the drain in the room capable of receiving the water from the
machine?

11E

The mechanical out-of-balance switch is activated.
• Check that the sensor of the switch is within the limit frame.
438 9152-31/06
05.03
12. Troubleshooting
12
19