Electrolux W365H Service Manual page 162

41
Codes 91 and 92 are used to store the values for
coin slots 1 and 2. For mechanisms with only one
slot, only code 91 is used.
The values to be stored are the ratio of one coin
to the other.
For example: if the coin slots are for a 1 crown
coin and a 5 crown coin. The value 1 should be
stored under code 91, and the value 5 should be
stored under code 92.
• Enter code 91 using the buttons which have
Fig.
become number keys 9 and 1.
2
The display will now show 91.
• When entering the actual value: keep the
Fig.
price-programming button activated (the switch
3
is located under the top cover at the right front
edge). Enter the value 1 and then release the
button.
• Enter code 92. The display will now show 92.
Fig.
4
• Enter the value 5.
Fig.
5
• Exit the service program by pressing the
service button again.
4
41. Coin-meter
2
3
4
5
Service
Manual
2275
2276
2272
2274
438 9163-21/01
01.42