Speed Control And Enabling Via Parameter - WEG SCA06 User Manual

6.2.1.3 Speed Control and Enabling via Parameter

Sequence
1 SCA06 energized, no faults.
Press the key
P00099. This parameter will cause PWM pulses
2
in the motor, that is, it may spin, depending only
on the speed reference in P00121.
Press the key
3
parameter P00099.
Press the key
4
the content from 0 to 1.
5
Press the key
Press the key
6
P00121.
Press the key
7
parameter P00121.
Action / Result
until you reach parameter
. Then you enter the content of
once to modify the value of
. The value is saved.
until you reach parameter
. That will show the content of
Energizing and Start of Operation
Indication on the Display
6
SCA06 | 6-5