Receiving And Storage - WEG SCA06 User Manual

2.6 RECEIVING AND STORAGE

The SCA06 is supplied packed in a cardboard box. In the external part of this package, there is an identification
label identical to the one attached to the side of the SCA06.
At the receipt of the product, check:
If the identification label of the SCA06 corresponds to the purchased model.
„
Any damages occurred during transportation.
„
Report any damages immediately to the carrier.
„
If the SCA06 is not installed soon, store it in a clean and dry location (temperature between -25 °C (-13 °F) and
60 °C (140 °F)), with a cover to prevent dust accumulation inside it.
ATTENTION!
When the inverter is stored for long periods, it becomes necessary to perform the capacitor reforming.
Refer to the procedure in Table 7.2 on page 7-5.
General Information
SCA06 | 2-7
2