CipherLab CP30 Series Reference Manual page 165

MSI
Check digit verification If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of
the algorithms below. If the check digit is incorrect, the
barcode will not be accepted.
Check digit algorithm:
One Check Digit
Two Check Digits
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
 One or two fixed lengths
Select Length
(min/max)
 Range (1~55)
GS1 DataBar (RSS)
GS1 Databar-14 GS1 DataBar-14 is short for GS1 DataBar Omnidirectional.
This group consists of (1) GS1 DataBar Omnidirectional,
(2) GS1 DataBar Truncated, (3) GS1 DataBar Stacked, and
(4) GS1 DataBar Stacked Omnidirectional.
GS1 Databar Limited
GS1 Databar Expanded This group consists of (1) GS1 DataBar Expanded, and (2)
GS1 DataBar Expanded Stacked.
Convert RSS to "Convert to UPC/EAN" only applies to GS1 Databar-14 and
UPC/EAN GS1 Databar Limited barcodes not decoded as part of a
Composite barcode.
Convert to EAN-13
Strip the leading "010" from barcodes.
 "01" is the Application ID and must be followed by a
single zero (the first digit encoded)
Convert to UPC-A
Strip the leading "0100" from barcodes.
 "01" is the Application ID and must be followed by
two or more zeros (but not six zeros)
EAN/JAN
Enable EAN-8
Enable EAN-13
Bookland EAN (ISBN) The EAN-13 barcode starting with 978 will be converted to
ISBN.
Enable Addons Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with addons.

Ignore Addons

Decode Only With Addons
 Auto-discriminate
Appendix II
Single Modulo 10
 Mod 10/Mod 11
 Mod 10/Mod 10
Laser (SE955)
Enable
Single Modulo
10
No
4~55
---
Enable
Enable
Enable
No
---
Enable
Enable
Enable
Ignore...
153