For Product With Laser; Safety Precautions; Care & Maintenance - CipherLab CP30 Series Reference Manual

FOR PRODUCT WITH LASER

CAUTION
This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not
stare into beam.
SPECIFIC ABSORPTION RATE (SAR) INFORMATION
This mobile computer model CP30 has been designed to comply with applicable safety
requirements for exposure to radio waves. These requirements are based on scientific
guidelines that include safety margins designed to assure the safety of all persons,
regardless of age and health. The radio wave exposure guidelines employ a unit of
measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are
conducted using standardized methods with the CP30 transmitting at its highest certified
power level in all used frequency bands. While there may be differences between the SAR
levels of various models, they are all designed to meet the relevant guidelines for
exposure to radio waves. SAR data information for residents in countries that have
adopted the SAR limit recommended by the International Commission of Non-Ionizing
Radiation Protection (ICNIRP), which is 2 W/kg averaged over ten (10) gram of tissue
(for example European Union ):
The highest SAR value for this model when tested by CIPHERLAB for use at the body
position is 1.02 W/kg (10g).

SAFETY PRECAUTIONS

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The use of any batteries or charging devices, which are not originally sold or

manufactured by CipherLab, will void your warranty and may cause damage to
human body or the product itself.
DO NOT disassemble, incinerate or short circuit the battery.

DO NOT expose the scanner or the battery to any flammable sources.

For green-environment issue, it's important that batteries should be recycled in a

proper way.
Under no circumstances, internal components are self-serviceable.

The charging and communication cradle uses an AC power adaptor. A socket outlet

shall be installed near the equipment and shall be easily accessible. Make sure there
is stable power supply for the mobile computer or its peripherals to operate properly.
CARE & MAINTENANCE
This mobile computer is intended for industrial use. The mobile computer is rated IP

42, however, it may do damage to the mobile computer when being exposed to
extreme temperatures or soaked wet.
When the body of the mobile computer gets dirty, use a clean and wet cloth to wipe

off the dust. DO NOT use/mix any bleach or cleaner. Always keep the LCD dry.