Custom Setup; Setting The Work Day, Work Time, And Work Zone - Honda HRM300/500 Owner's Manual

Custom Setup

Custom Setup
Setting the work day, work time, and
work zone
You can set the work day and work time for the lawnmower to operate. You
can also specify a specific zone for each work time.
Home screen
Configure this setting to have the lawnmower operate
on specific days and times in specific zones.
You can set up to two times per day for operation.
NOTE:
- See "Setting the boundary wire location at which
the lawnmower starts mowing" (M page 24).
22
[3.Custom Setup]
J
[1.Timer]
J
Select the day on which you want the
1
lawnmower to operate.
Add a check to the box by pressing the H
2
button.
Select [0.OK].
3
Press the H button to proceed to the
4
timer setting screen.
Enter a start time and an end time in 24-
5
hour format for [Timer 1].
Enter a number to select a zone.
6
If necessary, also enter a start time and
7
an end time in 24-hour format for [Timer
2].
Enter a number to select a zone.
8
Press the H button.
9
The message "Activated" is displayed.
Press the H button to return to the
10
previous screen.
!