Table of Contents
Advertisement
PARTS AND CONTROLS
GRASS BAG
(P. 4)
HANDLEBAR
ADJUST
KNOB (2)
(P. 3)
OIL FILLER CAP
(P. 4)
RECOIL
STARTER GRIP
REAR
DISCHARGE
GUARD
(P. 5)
FUEL TANK
CAP
(P. 6)
SPARK PLUG
CAP
(P. 13)
AIR FILTER
CARBURETOR
(P. 13)
FUEL VALVE ON
BLADE CONTROL
LEVER
(P. 8)
HANDLEBAR
FRONT CUTTING
HEIGHT
ADJUSTMENT
LEVER
(P. 6)
MUFFLER
(P. 14)
REAR CUTTING
HEIGHT
ADJUSTMENT
LEVER
(P. 6)
CLIP DIRECTOR
(P. 5)
FUEL VALVE OFF
INITIAL MOWER SETUP
List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorized Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref. No.
Grass bag
Grass bag frame
Engine oil
Owner's manual
Adjust the Handlebar
1. With the handlebar adjust knobs in the unlocked position, pull the
blade control lever against the handlebar , and then carefully
raise the handlebar into the mowing position .
NOTICE
Do not allow the blade control cable to become caught, pinched,
or kinked while unfolding the handlebar. The cable or blade
control system may become damaged.
BLADE CONTROL LEVER
2. Align the adjust knobs with one of the two holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height. Remove all the cardboard from around the handlebar.
Description
HANDLEBAR
ADJUST KNOBS
UNLOCKED
LOCKED
Qty.
1
1
1
1
3
Advertisement
Table of Contents
