Table of Contents
Advertisement
PARTS AND CONTROLS
SMART DRIVE CONTROL
GRASS BAG
(P. 4)
HANDLEBAR
ADJUST
KNOB (2)
(P. 3)
OIL FILLER CAP
(P. 6)
®
ROTO-STOP
BUTTON
RECOIL STARTER GRIP
REAR DISCHARGE
GUARD
(P. 5)
SPARK PLUG
CAP
(P. 14)
CARBURETOR
AIR FILTER
(P. 13)
FUEL VALVE ON
(P. 8)
BLADE CONTROL LEVER
(P. 8)
THROTTLE LEVER
(P. 8)
HANDLEBAR
FUEL TANK CAP
(P. 7)
FRONT CUTTING
HEIGHT
ADJUSTMENT
LEVER
(P. 6)
MUFFLER
(P. 14)
(P. 8)
REAR CUTTING
HEIGHT
ADJUSTMENT
LEVER
CLIP DIRECTOR
(P. 5)
FUEL VALVE OFF
INITIAL MOWER SETUP
List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorized Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref. No.
Grass bag
Grass bag frame
Engine oil
Owner's manual
Adjust the Handlebar
1. Turn the handlebar adjust knobs to the unlocked position, and
carefully raise and hold the handlebar in the mowing position .
NOTICE
Do not allow the blade control cable to become caught, pinched,
or kinked while unfolding the handlebar. The cable or blade
control system may become damaged.
(P. 6)
2. Align the adjust knobs with one of the two holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height. Remove all the cardboard from around the handlebar.
Description
HANDLEBAR
ADJUST KNOBS
UNLOCKED
LOCKED
Qty.
1
1
1
1
3
Hide quick links:
Advertisement
Table of Contents
