Overview; How The Honda Robotic Lawnmower Works; Features - Honda HRM300/500 Owner's Manual

How the Honda Robotic Lawnmower works / Features
1

OVERVIEW

How the Honda Robotic Lawnmower works

Configuring the system
The mowing zone is determined by the boundary wire that emits a signal; when the
lawnmower detect the boundary it turns and it cuts the grass randomly. When battery
starts running out, it goes back to the docking station.
Pegs

Features

Mowing zones
You can designate which areas
of your lawn the Honda Robotic
Lawnmower should focus on
mowing. Up to 5 mowing zones
can be set by laying a boundary
wire, increasing efficiency.
4
Boundary wire
Lay the boundary wire by securing
it on the ground with pegs, or
burying it under the ground.
Operation timer
The Honda Robotic Lawnmower
has multiple settings for
designating the day and time the
lawnmower operates. You can
configure the lawnmower to run
on your days off, or during certain
times that are convenient for you.
Transformer
The transformer must be installed in a shaded
area protected from rain.
Docking station
Power cord Robotic Lawnmower
Convenience
After configuring the Honda Robotic
Lawnmower, it starts and stops
mowing without any prompting. When
the timed programme is complete or
the battery's charge becomes low, the
lawnmower automatically returns to
its docking station and recharges its
internal battery.
2.5 m