Table of Contents
Advertisement
PARTS AND CONTROLS
CLIP DIRECTOR®
KNOB
(P. 5)
OIL FILLER CAP
(P. 13)
SELECT DRIVE®
CONTROL
RECOIL
STARTER
GRIP
(P. 9)
CUTTING HEIGHT
ADJUSTMENT
LEVER (4)
(P. 6)
SPARK PLUG
CAP
(P. 14)
AIR FILTER
(P. 13)
CARBURETOR
(P. 13)
FUEL VALVE ON
BLADE CONTROL
LEVER
(P. 8)
REAR
DISCHARGE
GUARD
(P. 5)
FUEL TANK
CAP
(P. 7)
MUFFLER
(P. 14)
(P. 8)
GRASS BAG
(P. 6)
HANDLEBAR
ADJUST KNOB (2)
(P. 3)
FUEL VALVE OFF
INITIAL MOWER SETUP
List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorized Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref.
Description
No.
Grass bag frame
Grass bag
Engine oil and owner's manual
Adjust the Handlebar
1. With the handlebar adjust knobs in the unlocked position, pull the
blade control lever against the handlebar, and then raise the
handlebar into the mowing position.
BLADE CONTROL LEVER
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock position,
making sure both sides are positioned at the same height.
4. Remove all the cardboard from around the handlebar.
Qty.
1
1
1
HANDLEBAR ADJUST KNOBS
UNLOCKED
LOCKED
3
Advertisement
Table of Contents
