Maintenance; Periodic Inspection And Maintenance; Cleaning And Checking; Maintenance Schedule - Honda HRM300/500 Owner's Manual

Robotic lawnmover
Table of Contents

Advertisement

7

MAINTENANCE

Periodic inspection and maintenance

The lawnmower must be periodically inspected and maintained for safety and to keep it running at a high
level of performance.
Periodic maintenance will also help to extend service life.
The required service intervals and the kind of maintenance to be performed are described in the following
chart.
Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will
be able to perform a variety of checks and software updates that cannot be completed by the owner.

Maintenance schedule

REGULAR SERVICE PERIOD
Perform at every indicated
period or operating hour
interval, whichever comes
soonest.
Blades *
1
Blade disc *
1
Manual stop button
Body parts *
1
Docking station
Docking station screws
Rear (drive) wheels *
Front (caster) wheels *
*1 Blades, the blade disc, body parts, the front (caster) wheels, and the rear (drive) wheels should be replaced as
needed.
*2 These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service procedures.
*3 If the screws become loose, tighten them securely. For details, see "Installation" (M page 12).

Cleaning and checking

Dirt and grass may accumulate on the top and bottom of the lawnmower during and after mowing, and the
blades may become worn, damaged, or unable to turn. Make sure to check the lawnmower according to
the chart in "Periodic inspection and maintenance" (M page 49).
N WARNING
- Make sure to press the manual STOP button and turn the lawnmower off before performing the
following procedures.
- Put on a pair of work gloves before performing the following procedures.
NOTE:
- Remove the lawnmower from the docking station when performing the following procedures.
Check
Check
Check
Clean
Check
Clean
Check
Check-adjust
Clean
1
Check
Clean
1
Check
Periodic inspection and maintenance / Cleaning and checking
Every year or
500 hours
Every week
(whichever
comes soonest)
™ *
3
Page
(M page 53)
(M page 53)
(M page 52)
(M page 50)
™ *
2
(M page 51)
(M page 54)
(M page 54)
(M page 50)
™ *
2
(M page 50)
™ *
2
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents