Avaya 9608 Administrator's Manual page 77

Parameter name
GRATNAV6
GUESTDURATION
GUESTLOGINSTAT
GUESTWARNING
HEADSYS
HEADSETBIDIR
HOMEIDLETIME
HTTPDIR
June 2014
Default value Description and value range
Valid values are:
1 = Yes, process gratuitous ARPS
0 = No, ignore gratuitous ARPS
0 Applies only to deskphones running software Release 6.0
and later. Specifies whether the call server will process
gratuitous and unsolicited IPv6 Neighbor Advertisement
messages. A received message is considered unsolicited
if the deskphone did not send a corresponding Neighbor
Solicitation message first; it is not determined by the value
of the Solicited flag in the received message. An IPv6
unsolicited Neighbor Advertisement message is similar to
a gratuitous ARP message in IPv4.
2 Guest login duration in hours. One or two ASCII numeric
digits. Valid values are 1, through 12.
0 Guest login permission flag. If set to 1, the Guest Login
option is listed on the Avaya Menu; if set to 0, the Guest
Login option is not available.
5 Guest login warning in minutes to indicate when to notify
the user that GUESTLOGINDURATION will expire. One or
two ASCII numeric digits. Valid values are 1 through 15.
0 if Headset operational mode. Specifies whether the
CALLCTRSTA deskphone will go on-hook if the headset is active when a
T =0, else 1 Disconnect message is received. One ASCII numeric digit.
Valid values are:
0 or 2 = The deskphone will go on-hook if a Disconnect
message is received when the headset is active.
1 or 3 = Enabled, Disconnect messages are ignored when
the headset is active.
0 Specifies the permission flag for enabling or disabling the
Headset Bi-directional functionality. Valid values are:
0= Default, Bi-directional functionality disabled, 1=
Switchhook and Alerting, 2= Switchhook only.
10 For touchscreen deskphones only, the number of minutes
after which the Home screen will be displayed. Value is 1
or 2 ASCII numeric digits, 0 through 30. If you prefer an
idle Web page as the display instead of the Home screen,
set this value to less than the WMLIDLETIME value.
" " (Null) HTTP server directory path. The path name prepended to
all file names used in HTTP GET operations during
initialization. Value: 0-127 ASCII characters, no spaces.
Null is a valid value. Leading or trailing slashes are not
required. The command syntax is SET HTTPDIR
myhttpdir" where myhttpdir is your HTTP server path.
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
Comments? infodev@avaya.com
9600 Series H.323 customizable system parameters
77